Catalog number: GJ2-3 Features: ●The capacity table is printed on the back of the mount, so you can immediately see which size to choose according to the object to be pulled. ●In addition, the operating procedure is written, so even beginners can use it with confidence. ●The male thread hexagonal part can be turned with a ratchet wrench or a box wrench. ●There are three sizes available: 75mm, 100mm, and 150mm, so you can choose according to the object to be pulled. Applications: ●For pulling out gears, pulleys, etc. from their shafts. Specifications: ●Compatible pulleys (mm): 40-75 ●Claw reach length (mm): 60 ●Breaking load (kN): 15 ●Hexagonal size of the push screw (mm): 14 Caution: ●Before use, be sure to check that the capacity is suitable. ●The pulling force may require more force than expected due to adhesion or seizure caused by rust on the object to be pulled out, so please use a model with ample capacity. ●Do not use in a way that causes uneven loads. ●Do not pull out inner rings, etc. with the claws upside down.
