Yanase One-touch shaft Toppo 25 (35) x 10 x 3 #80 TOF25105 10 pieces

Catalog number: TOF25105 Features: ● A special flap wheel with abrasive cloth wrapped around it. When rotated, the abrasive cloth spreads due to centrifugal force. ● Because the abrasive cloth spreads due to centrifugal force, it fits well when pressed against the workpiece. ● Since it is capless on both sides and does not use metal fittings, it is a flap wheel that is easy to use and does not scratch the workpiece. ● The shaft and flap part can be removed with one touch, reducing waste. Applications: ● Polishing of metal surfaces such as iron, stainless steel, and aluminum. ● It is possible to polish the inner surface of pipes and round holes. (Applicable when the hole diameter is larger than the diameter when stationary and smaller than the diameter when rotating) ● Deburring, rust removal, polishing before painting, hairline insertion, etc. ● Tools used: Straight grinder. Specifications: ●Grain size (#): 80 ●Outer diameter (mm): 25 ●Width (mm): 10 ●Shaft diameter (mm): 3 ●Shaft length (mm): 30 ●Number of blades (pieces): Approximately 54 ●Maximum operating speed (rpm): 20000 ●Maximum operating speed: 20000rpm Material/Finish: ●Shaft: Steel Set contents/Accessories: ●Mandrail included (2 per 10 pieces) Caution: ●Do not use at a speed exceeding the maximum operating speed. ●Always wear protective gear such as a hard hat and safety glasses when working.