Union Tool High Grade Ball End Mill R0.45 x Blade Length 0.63 x φ4 UDCBF2009-0063 1 piece

Catalog number: UDCBF2009-0063 Features: ●This ball end mill can cut cemented carbide and hard brittle materials. (Advanced version of UDCB) ●The blade shape and diamond coating have been newly improved, and the machining removal volume has been greatly improved. ●A good machining surface without burrs has been achieved, especially in rough to finish machining. ●This ball end mill can cut cemented carbide. ●The blade shape that is optimal for machining cemented carbide has been adopted, and an amazing "deep" cut has been achieved. ●The blade shape and diamond coating have been newly improved, and the machining removal volume has been greatly improved. ●The groove at the tip of the ball has achieved an outstanding finishing surface. ●The cutting edge has been specially treated to minimize chipping and steps on the workpiece, and is widely applicable from rough to finish machining. Applications: ●Workpiece: cemented carbide, highly brittle materials. ●Blade length (l): 0.63 Specifications: ●Ball radius (mm): 0.45 ●Blade length (mm): 0.63 ●Total length (mm): 50 ●Shank diameter (mm): 4 ●Shank taper angle (Bta) (°): 16 ●UDC coating ●Straight blade ●2-blade ball end mill UDCBF Material/Finish: ●Fine particle alloy (MG) Note: ●The shank taper angle is a guideline. ●If interference with the workpiece is required, be sure to measure it and confirm. ●Be careful of contact between the shank and the workpiece. ●To prevent vibration of the cutting edge, do not chuck the shank part that has coating on it.