Union Tool Carbide End Mill Long Neck Ball R3 x Effective Length 10 x φd6 HSLB2060-100 1 piece

Catalog number: HSLB2060-100 Features: ● Machining high-hardness mold materials of 40HRC or more has achieved higher machining efficiency, longer life, and higher-quality machined surfaces than ever before. ● Adopts a new HM coat that maintains film hardness and improves oxidation resistance. ● Stable machining is possible with water-soluble or oil-based cutting oil, oil mist, or air blow. ● Adopts a new HM coat that improves oxidation resistance while maintaining film hardness. ● Stable machining is possible with coolant, mist, or air blow. ● Adopts a new HARDMAX coat that improves oxidation resistance while maintaining film hardness. ● The rake angle at the tip of the ball is set to negative, improving wear resistance and improving machining dimensions. ● The rake angle on the outer periphery of the ball is set to a weak negative to ensure sharpness, provide a good machined surface, and prevent tipping. Applications: ●Compatible workpiece materials: carbon steel, alloy steel, pre-hardened steel, hardened steel (up to 55HRC) (up to 60HRC) (up to 70HRC), cast iron, copper, titanium alloy, and super heat-resistant alloy. Specifications: ●Ball radius (mm): 3 ●Neck length (mm): 10 ●Blade length (mm): 4.8 ●Total length (mm): 80 ●Shank diameter (mm): 6 ●Surface treatment: HM coating ●Neck diameter (φd): 5.9 ●Twist angle 0° (R0.05-0.075), 30° (R0.1-3) ●Made in an ISO9001 certified factory ●Made in an ISO14001 certified factory ●HM coating ●Twist angle 30° ●HM coated 2-blade long neck ball end mill for high hardness HSLB Material/Finish: ●Carbide fine particle alloy (Super MG) ●Carbide fine particle alloy (Super MG) ●Carbide fine particle alloy (Super MG) Note: ●The shank taper angle is a guideline. ●If interference with the workpiece is required, be sure to measure it and confirm. ●Be careful of contact between the shank and the workpiece. ●To prevent the blade tip from vibrating, do not chuck the shank part that has coating on it. ●If you are concerned about interference with the work, be sure to measure it and confirm it.