Union Tool Carbide End Mill Long Neck Radius UDCLRS2005-003-005 1 piece

Catalog number: UDCLRS2005-003-005 Features: *The blade shape is optimal for machining cemented carbide, allowing for an astonishingly deep cut. *A good machined surface is achieved without burrs from semi-rough to finishing machining. *Diamond coating for machining cemented carbide. *Coating with outstanding hardness, toughness, and adhesion. *The blade shape is optimal for machining cemented carbide, allowing for an astonishingly deep cut. Applications: *Workpiece: glass-filled resin, cemented carbide, hard and brittle materials. Specifications: ●Blade diameter (mm): 0.5 ●Corner radius (mm): 0.03 ●Blade length (mm): 0.25 ●Total length (mm): 50 ●Shank diameter (mm): 4 ●Effective length (l): 0.5 ●Neck diameter (φd1): 0.46 ●Outer diameter (D): 0.5 ●Shank taper angle (Bta) (°): 16 ●Cutting material ●Manufactured in an ISO9001 certified factory ●Manufactured in an ISO14001 certified factory ●UDC coating ●Twist angle 0° ●2-blade diamond-coated long-neck radius end mill for machining carbide alloys UDCLRS Material/Finish: ●Fine particle alloy (MG) Note: ●The shank taper angle is a guideline. ●If interference with the workpiece is required, be sure to measure it and confirm. ●Be careful of contact between the shank and the workpiece. ●To prevent the blade tip from vibrating, do not chuck the shank part that has coating on it.