Union Tool Carbide End Mill Ball Radius R1 x Blade Length 3 x φ4 CSEB2020-0300 1 piece

Catalog number: CSEB2020-0300 Features: ●By optimizing the blade shape, we have achieved excellent wear resistance in rough processing and outstanding surface roughness in finishing processing. ●We have adopted a new UTCOAT with improved hardness, toughness, lubricity, and adhesion, improving wear resistance and surface roughness. ●Wide range of materials from copper and raw materials to 55HRC. ●We have adopted a new UT coat with improved hardness, toughness, lubricity, and adhesion, improving wear resistance and surface roughness. Applications: ●Workpiece materials: carbon steel, alloy steel, pre-hardened steel, hardened steel (up to 55HRC), cast iron, copper, titanium alloy, super heat-resistant alloy. ●Compatible workpiece materials: carbon steel, alloy steel, pre-hardened steel, hardened steel (up to 55HRC), cast iron, aluminum alloy, copper, titanium alloy, heat-resistant alloy Specifications: ●Ball radius (mm): 1 ●Blade length (mm): 3 ●Total length (mm): 60 ●Shank diameter (mm): 4 ●Surface treatment: UT coating ●Shank taper angle (Bta) (°): 11 ●Twist angle 0° (R0.05), 30° (R0.1-R6) ●Made in an ISO9001 certified factory ●Made in an ISO14001 certified factory ●UT coating ●Twist angle 30° ●2-blade ball end mill CSEB Material/Finish: ●Super-hard fine particle alloy (Super MG) Note: ●The shank taper angle is a guideline. ●Be sure to measure and confirm if interference with the workpiece is required. ●Be careful of contact between the shank and the workpiece. ●To prevent the blade tip from vibrating, do not chuck the shank part that has coating on it.