Union Tool Carbide End Mill Radius φ6 x Corner R0.5 HRRS4060-05-18S 1 piece

Catalog number: HRRS4060-05-18S Features: ●By optimizing the corner R size, machining with a larger pick feed than usual has been achieved. ●Seamless radius shape. ●High hardness materials up to 65HRC can also be machined. ●Outer diameter tolerance: 0/-0.02 (D≦6), -0.01/-0.03 (D≧8). ●By shortening the overall length and reducing the tool overhang length, higher speed and precision machining can be performed. Applications: ●Workpiece material: Pre-hardened steel, hardened steel (up to 55HRC) (up to 60HRC) (up to 65HRC), cast iron. Specifications: ●Blade diameter (mm): 6 ●Corner radius (mm): 0.5 ●Blade length (mm): 6 ●Total length (mm): 50 ●Shank diameter (mm): 6 ●Effective length (l): 18 ●Outer diameter (D): 6 ●HARDMAX ●Twist angle 45° ●4-blade long-neck radius end mill HRRS-S Material/Finish: ●Ultra-fine particle alloy (Super MG) ●Super-hard fine particle alloy (Super MG) Note: ●The shank taper angle is a guideline. ●If you are concerned about interference with the workpiece, be sure to measure it and check it. Be careful of contact between the shank and the workpiece.