Union Tool Carbide End Mill Radius φ8 x Corner R0.5 HRRS4080-05-24 1 piece

Catalog number: HRRS4080-05-24 Features: ●By optimizing the corner R size, machining with a larger pick feed than usual has been achieved. ●Seamless radius shape. ●High hardness materials up to 65HRC can also be machined. ●Outer diameter tolerance: 0/-0.02 (D≦6), -0.01/-0.03 (D≧8). ●By shortening the overall length and reducing the tool overhang length, higher speed and precision machining can be performed. Applications: ●Workpiece material: Pre-hardened steel, hardened steel (up to 55HRC) (up to 60HRC) (up to 65HRC), cast iron. Specifications: ●Blade diameter (mm): 8 ●Corner radius (mm): 0.5 ●Blade length (mm): 8 ●Total length (mm): 100 ●Shank diameter (mm): 8 ●Effective length (l): 24 ●Neck diameter (φd1): 7.82 ●Outer diameter (φD): 8 ●Made in an ISO9001 certified factory ●Made in an ISO14001 certified factory ●HARD MAX: HARD MAX coating ●Twist angle 45° ●4-blade high-efficiency radius end mill HRRS Material/Finish: ●Ultra-fine particle alloy (Super MG) ●Super-hard fine particle alloy (Super MG) Note: ●The shank taper angle is a guideline. ●If interference with the workpiece is required, be sure to measure it and check. ●Be careful of contact between the shank and the workpiece. ●The shank taper angle is a guideline. ●To prevent the blade tip from vibrating, do not chuck the shank part that has coating on it.