Union Tool Carbide Alloy UDC Coated 2-Blade Long Neck Radius for Machining Hard and Brittle Materials UDCLRSF2020-003020 1 Piece

Catalog number: UDCLRSF2020-003020 Features: ●This is an advanced version of the long-neck radius end mill UDCLRS, which can cut carbide and hard brittle materials. ●By improving the diamond coating and adopting the optimal blade shape, it is possible to make an incredible "deep" cut and extend the tool life. ●By applying a special treatment to the cutting edge, it minimizes chipping and steps on the workpiece, and is widely applicable from medium roughing to finishing processing. Specifications: ●Corner radius (mm): R0.03 ●Blade length (mm): 1 ●Total length (mm): 50 ●Shank diameter (mm): 4 ●Number of blades (pieces): 2 ●Surface treatment: UDC COAT ●Effective length (mm): 2 ●Number of blades: 2 ●Outer diameter (mm): 2 ●UDC coat ●Twist angle 0° ●Radius type ●2 blades Material/Finish: ●Fine particle carbide alloy (MG) Note: ●The shank taper angle is a guideline. ●If interference with the workpiece is required, be sure to measure it and check it. ● Be careful not to let the shank come into contact with the workpiece. ● To prevent the tip of the blade from vibrating, do not chuck the shank if it has coating on it.