Union Tool 2-blade long neck ball cutter R0.2 x effective length 2.25 x blade length 0.32 x total length 45 HSLB2004-0225 1 piece

Catalog number: HSLB2004-0225 Features: ●By machining high-hardness mold materials of 40HRC or more, we have achieved higher machining efficiency, longer life, and higher-quality machined surfaces than ever before. ●We have adopted HARDMAX coating, which has increased hardness while maintaining high levels of heat resistance, toughness, and lubricity. ●Stable machining is possible with water-soluble and oil-based cutting oils, oil mist, and air blow. ●The rake angle at the tip of the ball is set to negative, improving wear resistance and improving machining dimensions. ●The rake angle on the outer periphery of the ball is set to a weak negative angle to ensure sharpness, provide a good machined surface, and prevent tipping. Uses: ●Compatible workpiece materials: Pre-hardened steel, hardened steel (up to 55HRC) (up to 60HRC) (up to 70HRC), carbon steel, alloy steel, cast iron, copper, titanium alloy, super heat-resistant alloy Specifications: ●Ball radius (mm): R0.2 ●Blade length (mm): 0.32 ●Total length (mm): 45 ●Number of blades (pieces): 2 ●Surface treatment: HARDMAX ●Number of blades: 2 ●2-blade HARDMAX long neck ball ●Made in an ISO9001 certified factory ●Made in an ISO14001 certified factory Material/Finish: ●SuperMG Caution: ●The shank taper angle is a guideline. ●If you are concerned about interference with the workpiece, be sure to measure it and check it. ●The outer diameter of the tool may be smaller than the shank diameter. ●Please be careful of contact between the shank and the workpiece.