Richell Snoopy Fluffy Baby Bath Step Up 1 piece

Can be used for a long time as your baby grows! Richell's baby bath can be used for a long time as a baby bath, a waiting area for your baby when you bathe alone, or a bath chair as your baby grows. ●STEP 1: For newborns and above. Use as a baby bath. You can remove the carrying cushion and use it as a baby bath. ●STEP 2: From around 2 months old - Wait for the adult to take a bath alone. The carrying cushion supports your baby in a sitting position, making it convenient while waiting for the bath. ●STEP 3: For ages 7 to 12 months: Use as a bath chair. It can be used as a bath chair by attaching a carrying cushion. ●Soft cushion that is gentle on babies. ● Fits snugly around the back and keeps the baby in good posture. The stopper holds the baby securely! ●When sitting is difficult, bathe in the sink. Its compact size allows for bathing in the sink. The vertical and horizontal double air structure firmly and gently supports mom's arms so they don't hurt. ●The hugging cushion supports the sitting posture before the baby can sit upright. ●Built-in air pump makes inflating easy. You can easily inflate it by simply pressing two points on the air pump with your hand. *The hug cushion does not come with an air pump. ●Hang on a hook to dry. After washing, hang it up in a well-ventilated place to dry. ●Folds up compactly. It folds up small for easy storage and carrying. ● Comes with a stop valve for easy drainage. It comes with a water stop valve, so you can drain water from underneath without having to turn it upside down. Newborns to 12 months [Suitable height] Up to 75cm 【size】 External dimensions (with cushion): Width 66 x Depth 41 x Height 42.5 cm External dimensions (without cushion): Width 66 x Depth 41 x Height 32.5 cm Depth: Approx. 24.5cm *May vary slightly depending on the amount of air. 【capacity】 When full: Approx. 20L Bath MAX line position: Approx. 9L Bath Chair MAX line position: Approx. 3L *May vary slightly depending on the amount of air. [Material] Main unit, cuddle cushion, top cover, air pump A, stopper, air pump B, water stop valve, drain, air inlet, fasteners, holes: polyvinyl chloride resin (uses plasticizers that comply with the Food Sanitation Act) Air valve: Synthetic rubber Internal air valve: Polyurethane [Precautions for use] *Please be sure to read this for parents/guardians. ★Warning - Children may behave unexpectedly, so parents must always be present and never take their eyes off their children. ・Please use on a flat and stable surface. Do not use on unstable surfaces such as on the lid of a bathtub, on a chair, or on the water of a bathtub or pool. - Do not move the unit while a child is on it. - If you leave the bath filled with hot water unattended, there is a risk of drowning, so please do not do this under any circumstances. - Always support your child's head while bathing to prevent drowning or water getting into their ears. - There is a risk of injury due to falling, so please stop using it if your child refuses to sit on it. - Do not allow children to stand on the seat or any other surface. ・It is designed to be stable with the weight of the hot water. Please note that if there is not much hot water or the child is light, it may be prone to falling over depending on the child's movements. ★Caution When inflating, inflate only enough to leave wrinkles on the outside. If you put in too much air, the air may expand due to the heat of the hot water and cause damage. - Before use, be sure to check for air leaks from the main unit. - Please avoid using for purposes other than intended. ・Please use in places where it is okay to get wet, such as the bathroom. If you have to use it in other places, be sure to place a waterproof sheet or mat under the product. When supplying hot water, be sure to press the stop valve firmly in. ・Do not use hot water over 50 degrees. ・The appropriate water temperature is 37 to 40 degrees. Please be sure to check before putting your child in the bath.