Liebex Light Sensor Timer Outlet CDS24 CDS24 1 pc

Catalog number: CDS24 Features: ● Automatically turns on when it gets dark → automatically turns off when it gets bright or automatically turns off when the set time (2 to 8 hours) arrives. ● Comes with three convenient operation modes. ● Light sensor mode: Turns on when it gets dark and turns off when it gets bright. ● Always-on mode. ● Light sensor + timer mode: When the knob in the center of the main unit is set to one of "2, 4, 6, or 8 hours", it turns on when it gets dark and turns off when the specified time arrives. Applications: ● Ideal for turning on/off outdoor lighting such as illuminations and store signs. ● Also for street lights, garden lights, and construction site floodlights. ● Heater-using equipment 1500W or less, transformer-using equipment 750W or less, motor-using equipment 400W or less. ● Lighting equipment 750W or less: fluorescent lamps, bulb illumination. ● Lighting equipment 250W or less: LED illumination, LED fluorescent lamps, etc. Specifications: ●Maximum timing: 8 hours ●Minimum timing (minutes): 120 ●Width (mm): 70 ●Depth (mm): 45 ●Height (mm): 110 ●Power supply (V): AC100 50/60Hz ●Color: Black ●Height (mm): 110 ●Width (mm): 70 ●Thickness (mm): 45 ●Power supply: AC100V 50/60Hz ●Effective cord length: Input side approx. 20 cm, output side approx. 15 cm ●Power consumption: 1W ●Connection capacity: Up to 1500W (lighting fixtures up to 750W) ●Timer setting time: 2, 4, 6, 8 hours ●Light sensor sensitivity: 20 to 30 lux *The "ON/OFF" timing may differ depending on the direction and angle at which the unit is installed, the weather, etc. Material/Finish: ●ABS (Acrylonitrile Butadiene Styrene) Resin Caution: ●If light hits the light sensor of this unit while the timer is operating and the surrounding area becomes bright for more than 5 seconds, the timer will return to the initial setting and count down. ●Please note that the light from the lighting fixture being used may cause the switch to turn off. ●In addition, dirt on the light sensor may cause it to malfunction. ●Cannot be used with air conditioners or coolers. ●May not be compatible with devices that are operated by remote control, devices that automatically operate using sensors, or devices with built-in electronic timers. ●Use LED lighting or metal halide lamps of 250W or less alone.