Wireless Conductivity Sensor PS-3210 101-354 1 unit

The conductivity of liquids can be measured easily. Effective for investigating water quality By measuring the ion concentration in a solution, you can measure the electrical conductivity. You can also investigate the water quality of the liquids around you and measure the total dissolved impurities (TDS). Highly waterproof and resistant to dirt such as sand and mud A temperature compensation sensor is built in, making it less likely for errors to occur due to water temperature. Simple design With a wireless conductivity sensor and a PC, tablet, or smartphone, you can measure conductivity anytime. Connect to your device via Bluetooth. Display measurement data in an easy-to-understand manner Using dedicated software (SPARKvue, Capstone), you can graph the change in conductivity over time and compare the measured data. Data logging function allows measurements to be taken away from the experiment site Measurement data is stored in the sensor and can be viewed on a PC or tablet after measurement. Measurement range: 0 to 20,000 μS/cm (not suitable for measuring seawater or salt water with a value of 50,000 μS/cm or more) Measurement accuracy: ±10% Operating temperature range: 0 to 80°C (probe part) Temperature measurement accuracy: ±0.5℃ (temperature compensation 5-35℃) Maximum sampling rate: 10Hz Battery: Replaceable button battery (CR2032 type) Compatible software: SPARKvue and Capstone Use of data log: Yes Data logging time: Approx. 3 days* Connectivity: Bluetooth 4.2 (see Air Link's [Compatible Devices]) IEC standard: Waterproof IP67 Size: Approx. W33 x D175 x H17mm Weight: Approx. 40g *Depends on sampling rate, measurement environment, and battery condition. Note: The dedicated software "SPARKvue" or "Capstone" is required. Also, if you want to connect to a PC via Bluetooth, a dedicated adapter is required. Product code: 101-354