One-touch fitting M series, different diameter union, 8mm-6mm, PUM-8-6-PM, 1 piece

The metal parts are electroless nickel plated. R (PT) threads are color-coded to allow the thread size to be identified at a glance. The body can be positioned according to the direction in which the tube is removed. The R (PT) thread part of the elbow/tee etc. and the resin joint rotate, allowing free positioning according to the direction in which the tube is removed after the fitting is attached. Additionally, the screws can be tightened while the resin part remains fixed. The tube grip rotates smoothly within the fitting, preventing the tube from getting twisted. For general air and water pressure piping For robots and labor-saving devices Compatible tube outer diameter D1 (mm): 6 Applicable tube outer diameter D2 (mm): 8 Fluid temperature (℃): Air: 0 to 60℃, Water: 0 to 30℃ (Do not freeze.) Fluids used: air, water Fluids used: air, water Fluid temperature: Air: 0 to 60°C, Water: 0 to 30°C (Do not freeze.) Maximum operating pressure: Air: 0.97MPa, Water: 0.19MPa Vacuum pressure (when the fluid used is air): 1.4kPa or more Applicable tubes (when the fluid used is air): Nylon tubes (AS1, AS4), spot welding equipment tubes (SP4, SPF), polyurethane tubes (UH, UF, UFL, UE, UC) Applicable tubes (when the fluid used is water): Nylon tubes (AS1), tubes for spot welding equipment (SP4, SPF) Material/Finish: Body (resin part)/Polybutylene terephthalate (PBT) Note: If the maximum working pressure of the tube is lower than the above pressure, please use it at or below the maximum working pressure of the tube. When using tubes other than those applicable, please use tubes whose outer diameter precision is within ±0.1 mm for nylon and within ±0.15 mm for urethane, and whose roundness is within 0.2 mm (maximum outer diameter - minimum outer diameter). Country of Origin: Japan Code number: 383-8329