Kyocera polishing machine FG-18 1 unit

Catalog number: FG-18 Features: ●Ideal for sharpening knives (vegetable knife, bunka knife, gyuto knife, sashimi knife, deba knife, petty knife), planes, chisels, carving knives, etc. ●Comes with a cushion to prevent water drips that can be easily adjusted up and down. ●Comes with a convenient knife guide. Uses: ●For sharpening scissors, knives, etc. Specifications: ● No-load speed (min-1): 400 (50Hz)/470 (60Hz) ● Width (mm): 270 ● Height (mm): 240 ● Length (mm): 270 ● Power supply (V): 100 ● Power cord length (m): 1.8 ● No-load speed (min-1) (50/60Hz): 400/470 ● Grinding wheel diameter (mm): 180 ● Grinding wheel dimensions (mm) (outer diameter x thickness x hole diameter): 180 x 20 x 70 ● Power consumption (W): 125 ● Rotation speed (min-1): (50Hz) 400, (60Hz) 470 ● Grinding wheel dimensions (mm): outer diameter 180 Set contents/accessories: ● Blade guide ● Spanner ● Water tank ● Drain hose ● Blade guide x 1, water tank x 1, medium whetstone (1000 grit) x 1, drain hose x 1, wrench x 1 Caution: ● Before using, check that the whetstone has no cracks or other abnormalities. ● Do not tilt the blade too much or apply too much force while using. ● Do not place your fingers in front of the cutting edge while sharpening. ● Be sure to attach tools (such as whetstones) and accessories securely according to the instruction manual. ● When changing the direction of rotation of the whetstone, turn off the switch once and wait until it stops rotating before turning on the reverse switch.