Low temperature constant temperature water tank -30~+80 440W LTB-400α 1 piece

It boasts precise temperature control and the durability of the stainless steel coil. The cooling capacity has been improved by adopting a high-performance refrigerator. The circulating water cooler uses a square coil made of SUS304, so it is compatible with pure water. (*If using pure water, please use a liquid with an electrical conductivity of 10μs/cm or more (low purity).) The refrigerant used is R-404, which has an ozone depletion factor of 0, making it environmentally friendly. The external circulation nozzle is installed on the front of the controller and can be freely rotated 180°. The temperature setting display uses a two-stage PV/SV display, allowing you to check the actual value and set value at a glance. By attaching the SB (support rod and bracket set), flasks and external sensors placed in the tank can be fixed with clamps. Type: -30 to +80 Cooling capacity(W): 440 Temperature setting and display method: Key input method (0.1℃), PV/SV digital two-level display Temperature control method: Microcomputer PID control Temperature sensor: Resistance thermometer (Pt100Ω) Temperature accuracy: ±0.1℃ (display accuracy: may exceed range depending on conditions) Heater: 1kW External dimensions: 350 x 585 x 965 mm Tank interior dimensions: 296 x 501 x 200 mm Effective opening dimensions: 293 x 227 x 200 mm Tank capacity: Approx. 24L Material: Water tank and cooling coil: Stainless steel (SUS304) Types of liquid used: Pure water, clean water, ethylene glycol, ethyl alcohol Refrigerant: R-404A Circulation pump (50/60Hz): Maximum flow rate 10.0/13.0L/min, Maximum head 6.5/8.5m Circulation nozzle outer diameter: φ11mm (suitable tube inner diameter φ8mm) Safety devices: Self-diagnosis function (detection of upper and lower temperature limits, float type dry-burn prevention, sensor abnormality, heater disconnection, leakage current/overcurrent breaker, refrigerator overload relay) External input/output: External temperature sensor input terminal (for Pt100), analog output meter for thermometer (1 to 5V), alarm output terminal (DC12 to 17V, 20mA) Timer function: 1 minute to 48 hours (in 1 minute increments) Power supply: AC100V 50/60Hz Maximum operating current: 18A Weight: 50kg Accessories: External circulation nozzle x 2, Insulated hose (inner diameter φ8mm x 1m) x 2 *The freezer will not work if the liquid temperature is over 40°C. *Please avoid continuous operation at high temperatures (around 80°C). *Circulation pump performance is measured when the pump is used alone. This product can be provided with validation services (IQ/OQ). Please feel free to contact us. *Validation service refers to the performance of installation qualification (IQ) and operational qualification (OQ) at the customer's site and the submission of an inspection report.