Sato CO2 Monitor Mini SK-40CTH ​​(1738-00) 1738-00 1 unit

Catalog number: 1738-00 Features: ●This is a CO2 monitor that notifies you of the timing for ventilation. ●The face mark character changes in three stages according to the CO2 concentration, and a buzzer sounds. ●The buzzer can be switched on and off. ●The sensor that measures the CO2 concentration uses a non-dispersive infrared gas sensor (NDIR), which is less susceptible to the influence of other gases and has a long sensor life. ●Using the eco mode function reduces power consumption and extends the battery life to approximately one year. ●It can be installed in four different ways to suit the installation location: on a table, on a wall, fixed to a wall, or attached to a metal surface. Applications: ●Commercial facilities such as offices, schools, and department stores. ●Inside buildings where people gather. Specifications: ● Target gas: Carbon dioxide (CO2) ● Measurement range: CO2 concentration: 400 to 5000 ppm Temperature: 0.0 to 50.0°C Humidity: 10.0 to 95.0% rh Dew point: -28.1 to 49.0°C (calculated value) ● Width (mm): 86 ● Depth (mm): 26 ● Height (mm): 86 ● Measurement range (ppm): 400 to 5000 ● Resolution (ppm): 1 ● Measurement items: [CO2] concentration, temperature, humidity, dew point ● Resolution: [CO2] concentration 1 ppm Temperature 0.1°C Humidity 0.1% rh Dew point 0.1°C ● CO2 concentration: ± (5% rdg + 50) ppm (400-3000ppm)/±7%rdg (other than the above) ●Temperature: ±0.6°C (20.0-40.0°C)/±1.0°C (other than the above) ●Humidity: ±5.0%rh (40.0-70.0%rh at 20-30°C)/±7.0%rh (other than the above) ●Power supply: 3 AAA batteries ●Buzzer volume: ●Traceability calibration: Supported ●JCSS calibration: Supported Material/Finish: ●Case: ABS resin ●Panel: Acrylic resin Set contents/Accessories: ●Instruction manual x 1 ●3 AAA batteries (for trial use) ●Anti-theft hook set x 1 ●Wall-mounting attachment x 1 Caution: ●Do not use in any place other than the general atmosphere. ●This product is precision-made, so do not drop it or subject it to vibration or impact. ●Do not disassemble or modify it, as this may cause it to break down. ●This product is not waterproof, so do not get it wet. ●Do not use in environments where electrical noise is generated.