Tabletop vibration tester CV-101Ma 1 unit

It is designed to allow easy vibration testing by vibrating the vibration table at the desired frequency and acceleration. Two operation modes can be selected: constant frequency mode and sweep mode. In constant frequency mode, vibration is applied at the set acceleration and frequency for a certain period of time and then stops automatically. In the sweep mode, the acceleration is fixed, the minimum and maximum frequency reciprocating motion (cycle) is repeated, and it automatically stops after a certain period of time. Maximum load of the measured object (kg): 1 Specifications: Control unit + drive unit Maximum amplitude: 5.0mm (single peak) Quantity: 1 piece Vibration frequency: 10-300Hz Operation mode: Constant frequency mode, sweep mode Operating time program: 1 to 99 minutes (minimum increment: 1 minute) Maximum acceleration: 2G (limited by amplitude) Power supply: AC100V 50/60Hz Power consumption: 200W Size: Control box/152×227×143mm, Actuator/220×150×137mm Weight: Control box/1.6kg, Actuator/12kg *The maximum amplitude is 10mm (±5mm), but is limited by the load of the payload. * With a maximum load of 1 kg, the maximum acceleration will not be 2G and the maximum amplitude will not be 5.0 mm. *When conducting vibration tests in the XYZ three-axis directions, we recommend using an attachment sold separately. Plate dimensions (mm): 150 x 150 x 10 M6 thread pitch: Regular Vibration direction: Up and down