Sakaguchi Silicone Belt Heater 200/100V50/12.5W1000L SBH-25 1 unit

Catalog number: SBH-25 Features: ●One side is flat, providing a uniform heating surface and excellent heating properties. ●Can be manufactured in a wide range of specifications, from low watts (W/m) to the heat resistance limit of the covering material. ●Developed for insulation and heating in the low to medium temperature range, this product has a wide range of uses. ●Capacity per meter: 50/12.5 W/m Applications: ●For heating pipes. Specifications: ●Power supply (V): Single phase 200/100●Capacity (W): 50/12.5●Power cord length (m): 1●Width (mm): 15●Thickness (mm): 4.5●Length (m): 1.0●Operating temperature range (℃): -50 to 180●Thermostat: None●Temperature adjustment range: None●Operating temperature range (℃): -50 to 180●Operating temperature: -50℃ to 180℃ (The operating temperature is only a guide. The temperature that can be used varies depending on the actual usage environment.)●Insulation resistance: 100MΩ or more at DC500 mega●Insulation withstand voltage: AC1000V/1 minute for those under 150V, AC1500V/1 minute for those over 150V●Connection tensile strength: 30N (3.06kgf) Material/Finish: ●Heat-resistant silicone rubber Caution: ●This product is an industrial product. ●For indoor use only. Do not pour water or solutions on the heater as it is not waterproof. ●When installing the heater, if it is not attached tightly to the object to be heated, the thermal transfer rate will decrease, but do not pull it too tightly when winding it, cross the heater, or overlap it. This may cause premature breakage or abnormal heating. ●Be careful not to bend the heater forcibly, causing cracks, etc. Also, do not bend the lead connection part (molded part) at a sharp angle or crush it. This may cause electric shock or premature breakage.