Fixed volume liquid pump MP-2001 1 unit

Spring-loaded tube case type that reduces the effort required for tightening adjustment A locking mechanism has been added to the stoppers on both ends of the tube case. Since it can be locked when set, it makes it easy to move and replace tubes. It has high discharge accuracy and excellent flow rate reproducibility. It is also suitable for delivering minute amounts of liquid. The forward and reverse rotation directions are illustrated and can be easily changed with a single switch. *Tubing with an outer diameter of 3 to 6.1 mm can be hung on two paths, allowing liquid to be sent to two or four locations at the same time. Standard Spring Loaded Performance Flow rate range: 10 to 1450 mL/h x 2 Flow rate accuracy: ±2% (repeatability within ±1%) Maximum discharge pressure: 98 kPa (1 kg/cm2) Maximum suction pressure: 9.8 kPa (0.1 kg/cm2) Liquid viscosity and temperature: Max. 2Pa・s (2000cP) 0 to 60℃ (no freezing) function Rotation settings: Volume settings Flow direction: forward/reverse switchable composition Motor: AC speed control induction motor, output 15W Drive circuit: Speed ​​feedback control Tube case: PET resin Safety Features: Thermal Protector standard Number of tubes: 2 Number of tube case layers: 1 layer (can be expanded to 2 layers) Usable tube materials: Silicone, Tygon®, Versilon (Fluran®), PharMed® Usable tube diameter: Outer diameter 3.2 to 6.1 mm Ambient temperature range: 0 to 40°C (no condensation) External dimensions: 137(166) x 145(164) x 177(190)mm / *Dimensions in parentheses include protrusions. Weight: 3.1kg Power input/power voltage: 0.4 A, 40 VA, AC 100 V 50/60 Hz *Performance values ​​are based on room temperature of 20°C, rated power supply voltage, water, liquid temperature of 18°C, back pressure of 0, and when using silicone tubing. *Tubes are sold separately. Flow rate, discharge pressure, and other performance characteristics may vary slightly depending on the tube used. Code: 251290