Small cooling trap UT-500A 1 unit

The entire centrifugal evaporator system is made compact. The installation area is compact at 183W x 282D mm. It does not take up much space even when installed on a laboratory bench or inside a draft chamber. Equipped with a leak connector that allows easy vacuum control as standard. Organic solvents can be efficiently recovered. Glass condenser for low boiling point solvents, direct trap Performance Dehumidification capacity: Max. 150mL (liquid recovery) Minimum temperature: -30℃ function Safety features: earth leakage, overcurrent breaker, refrigerator overload, refrigerator high pressure switch Included features: Standby lamp composition Refrigeration/refrigerant: Air-cooled, output 100W, R134a standard Trap tank and cooling coil material: Stainless steel Tank internal dimensions and capacity: Inner diameter 90 x 145, 0.85L Glass condenser connection diameter: Outer diameter 10mm Ambient temperature range: 5 to 35°C External dimensions: 183 x 282 x 376(490)mm / *The dimensions in parentheses are the values ​​when a glass condenser for low boiling point solvents is installed. Weight: Approx. 15kg Power input/power voltage: 5.4A, 540VA, AC100V 50/60Hz *Performance is based on the following conditions: room temperature 20℃, rated power supply voltage AC100V 50/60Hz, ethanol 98wt% 850mL, stirring, with lid. Performance may vary depending on room temperature, type of secondary refrigerant, etc. *The minimum temperature that can be reached is -20℃ when the room temperature is 35℃. *Accessories: Glass condenser for low boiling point solvents, glass protection net, tank lid, cooling water nozzle set for refrigerator *Cannot be used as a freeze dryer. Code number: 257440