Asahi EAZY WELD Easy Welding Kit Aluminum Kit EWK-AL 1052 1 S

Catalog number: 1052 Features: ●A simple welding kit that requires no equipment and can be used quickly anywhere with just a gas burner. ●Better results can be achieved by checking the appropriate temperature with an infrared thermometer. ●Keep the base material at the appropriate rod melting temperature. ●Rub the rod against the base material to melt it at the temperature of the base material and perform the repair work. ●Allow the melted rod to cool naturally for about 1 minute until it loses its luster. ●Heat the welding base material until it reaches the working temperature of the various rods (welding rods). Applications: ●For welding and repairing aluminum. Specifications: ● Shear strength (PSI): 34000 ● Compressive strength (PSI): 60000 ● Tensile strength (PSI): 39000 ● Electrical conductivity (%IACS): 24.9 ● Includes 2 aluminum rods ● Maximum operating temperature (℃): 391 ● Dimensions (mm): φ3 × 450 ● Easy welding kit Aluminum kit EWK-AL ● 2 aluminum rods + 1 dedicated burner + 1 dedicated cylinder + 1 wire brush ● Approximately 5 times stronger than soldering Material/Finish: ● Aluminum ● Zinc ● Copper ● Magnesium Set contents/Accessories: ● Aluminum rod (AL450) 2 ● Dedicated burner (840S) 1 ● Cylinder (860Z) 1 ● Wire brush (SWB) 1 Caution: ● Leaving iron filings or other debris behind when working may cause corrosion. ● Be careful not to overheat the base material and melt it.● Do not expose the rod (welding rod) to direct flame.● Rapid cooling with water etc. will drastically reduce its strength. Blowing air at it when it is not yet solidified will cause it to fly apart and be very dangerous. Overheating will cause it to repel and make it impossible to weld.● For aluminum with a thickness of over 5mm, it is very difficult to maintain the working temperature with the included gas burner, so please use acetylene gas. If it is difficult to raise the temperature of the base material, working with a fireproof brick placed under the material will increase efficiency.