This is a pen-type voltage tester that allows you to easily check the electrical status of non-contact (AC) and contact (AC) devices.
Comes with a volume that allows sensitivity adjustment during non-contact measurement.
Equipped with a voltage discrimination function for AC100V/200V. (Only for contact type measurement. If the grounding condition is unstable, accurate voltage discrimination is not possible.)
Comes with an LED light for use in dark places. Contact voltage detection range: AC7V to 1000V.
Non-contact voltage detection range: AC30V to 1000V
Indicator: Voltage detection LED: In non-contact mode, lights up when a voltage of AC30V to 1000V is detected. 100V LED: In contact mode, lights up when a voltage of AC7V to approximately 125V is detected. 200V LED: In contact mode, lights up when a voltage of approximately AC125V to 1000V is detected.
Sensitivity adjustment function: The detection voltage sensitivity can be adjusted using the volume on the back of the unit (only effective in non-contact mode)
Dielectric strength: AC2000V/1 minute (between detector and switch)
Lighting function: LED light can be turned on/off by pressing the LED button
Operating temperature and humidity: 0℃ to +40℃, 75% RH or less (but no condensation)
Storage temperature and humidity: -10℃ to +50℃, 75% RH or less (but no condensation)
Power supply: 2 LR44 button batteries (built-in for testing)
External dimensions (approx.): W17.5XH132XD18(mm)
Weight: Approx. 24g (including batteries)
