Watering duty M 2 pieces 2 pieces

This is a water supply device in which the liquid in the container rises up the tube through capillary action, drawing water up and allowing the water to seep out from the bisque part to moisten the soil. With this, you won't have to worry about watering your plants while you're away from home. It can automatically supply approximately 100 to 200cc of water per day. The silicone tube won't break or collapse, and the water absorption capacity has been increased. Contents: 2 pieces Size: (approx.) Width 3.5 x Depth 3.5 x Length 11.5 cm Material Water dispenser body: Unglazed clay/polyethylene Water supply tube: Silicone Water absorption cap: Polypropylene How to use: Remove the cap from the water supply hose from the main unit and immerse the main unit and water supply hose in a container filled with water for about 10 minutes. After that, run water through the water supply hose from the tap and check that water flows from the bottom. Also, fill the main unit with priming water. Make sure to securely attach the main unit and water supply hose cap. Insert the water supply hose into a container filled with water (please prepare separately) until it reaches the bottom, and then insert the unglazed part of the main body into the pot. Water supply will begin via capillary action. *After placing the plant in the pot, make sure that the water level in the container has decreased and that the water has soaked into the soil. *The amount of water supplied per unit of this product is approximately 200 to 300 mL per day, so please use this as a guideline. *The amount of water required varies depending on the plant, so the rate at which water is reduced will not be constant. *The body is unglazed, so dropping or hitting it may cause damage. *If the height of the water container is extremely low compared to the soil in the pot, water may not be supplied.