Washroom coating agent CTG001 1 set

Cleaning Pro's Kirei Series Easy to use and has professional results! Lasts for 3 years! (The first long-lasting effect for a home-use washroom coating!) It is a special cleaner and hybrid coating agent that has been specially developed for washbasins. Cleaning and stain prevention measures for ceramic washbasins Avoid using the product where the surface temperature is below 5°C, above 35°C, or humidity is above 85%. The main component is a silicone/fluorine composite resin. It may cause a rash, so please use the included gloves. The coating agent is not odorless. Be sure to ventilate the area. Be careful not to come into direct contact with skin or eyes. If the product does come into contact with your skin or clothing, wash it off with water. If the product gets into your eyes, rinse them with water for 15 minutes and consult a doctor. The gloss of the surface used may change. Please test in an inconspicuous area before use. Please read the instruction manual carefully and do not use the product for any purpose other than its intended use. Be sure to thoroughly remove any dirt or oil film and ensure the surface is sufficiently dry before applying. For stains that cannot be removed with the cleaner, please use a separate dedicated detergent. If the material is dirty or damp, the coating performance may deteriorate. Avoid using the product outdoors or when it is likely to rain. Keep out of reach of infants and children. When disposing of the coating agent, soak tissue with the coating agent and dispose of it as combustible waste. Contents: Cleaner, coating agent, gloves, cloth x 2 Required time (approximate): Normal: 3 hours or more (including drying time) Winter: 6 hours or more Fully cured: 24 hours Coating area: Approx. 1m2 Color: Colorless and transparent Material: Fluorine resin, silicone resin, hydrocarbon solvent Accessories: Cleaner/coating agent/gloves/cloth x 2