Junkosha One-touch fitting M series union 12mm PUM-12-PM 1 pc

Catalogue number: PUM-12-PM Features: * Metal parts are electroless nickel plated. * R (PT) threads have a different colored sticker applied to them, so that the thread size can be identified at a glance. * The body can be positioned according to the direction in which the tube is removed. * The joint between the R (PT) thread and the resin of elbows, tapes, etc. rotates, allowing free positioning according to the direction in which the tube is removed after the fitting is attached. * In addition, the screw can be tightened while the resin part is fixed. * The tube grip rotates smoothly inside the fitting, preventing the tube from getting twisted out. Applications: ● For general pneumatic and hydraulic piping ● For robots and labor-saving equipment Specifications: ● Suitable tube outer diameter D1 (mm): 12 ● Suitable tube outer diameter D2 (mm): 12 ● Fluid temperature (℃): Air: 0 to 60℃, Water: 0 to 30℃ (Do not freeze.) ● Fluid used: Air, water ● Maximum operating pressure: Air: 0.97MPa, Water: 0.19MPa ● Vacuum pressure used (if the fluid used is air): 1.4kPa or more ● Applicable tubes (if the fluid used is air): Nylon tubes (AS1, AS4), Spot welding equipment tubes (SP4, SPF), Polyurethane tubes (UH, UF, UFL, UE, UC) ● Applicable tubes (if the fluid used is water): Nylon tubes (AS1), Spot welding equipment tubes (SP4, SPF) Material/Finish: ● Body (plastic part): Polybutylene terephthalate (PBT) Note: If the maximum working pressure of the tube is lower than the above pressure, please use it at or below the maximum working pressure of the tube. If using a tube other than the applicable tube, please use a tube with an outer diameter precision of within ±0.1 mm for nylon and within ±0.15 mm for urethane, and with a roundness of within 0.2 mm (maximum outer diameter - minimum outer diameter).