Junkosha One-touch fitting M series Different diameter union Y 12mm-10mm PYAM-12-10-PM 1 pc

Catalog number: PYAM-12-10-PM Features: * Metal parts are electroless nickel plated. * R (PT) threads have a colored sticker applied to them that identifies the thread size at a glance. * The body can be positioned according to the direction in which the tube is removed. * The joint between the R (PT) thread and the resin of elbows, tapes, etc. rotates, allowing free positioning according to the direction in which the tube is removed after the fitting is attached. * In addition, the screws can be tightened while the resin part is fixed. * The tube grip rotates smoothly inside the fitting, preventing the tube from getting twisted out. Uses: ● For general pneumatic and hydraulic piping ● For robots and labor-saving equipment Specifications: ● Suitable tube outer diameter D (mm): 10-12 ● Operating temperature range (℃): Air: 0-60℃, Water: 0-30℃ (Do not freeze.) ● Fluid used: Air, water ● Suitable tube outer diameter D1 (mm): 12 ● Suitable tube outer diameter D2 (mm): 10 x 10 ● Fluid temperature (℃): Air: 0-60℃, Water: 0-30℃ (Do not freeze.) ● Maximum operating pressure: Air: 0.97MPa, Water: 0.19MPa ● Vacuum pressure used (if air is used): 1.4kPa or more ● Applicable tubes (if air is used): Nylon tubes (AS1, AS4), Spot welding equipment tubes (SP4, SPF), Polyurethane tubes (UH, UF, UFL, UE, UC) ● Applicable tubes (if water is used): Nylon tubes (AS1), Tubes for spot welding equipment (SP6, SPF) Material/Finish: Main body (resin): Polybutylene terephthalate (PBT) Caution: If the maximum working pressure of the tube is lower than the pressure above, use it at or below the maximum working pressure of the tube. If using tubes other than the applicable ones, the outer diameter precision should be within ±0.1mm for nylon and ±0.15mm for urethane, and the roundness should be within 0.2mm (maximum outer diameter - minimum outer diameter).