Wireless logger master unit (repeater) SK-L700R 1 unit

The wireless logger "SK-L700R series" is a data logger that allows network communication with up to 60 units. Using wireless technology, it is possible to configure equipment installed in remote locations, collect data, and monitor measurement values ​​in real time without the need for wiring. The repeater and child units are controlled from the parent unit connected to a computer. This device can also be used as a repeater, so if wireless signals cannot reach the device due to obstacles, you can improve communication distance and conditions by installing a repeater. You can switch between the parent unit and the repeater using the switch inside the battery box. The parent unit has two alarm output functions (Alarm 1, Alarm 2). The alarm output is normally open and the contacts are shorted when the alarm is activated. It can be connected to an alarm buzzer or lamp and used for monitoring in the event of an alarm. Warning function (email sending)/If the set conditions (upper or lower limit exceeded, battery level warning, etc.) occur, a warning email will be sent to a pre-registered email address. The logger function stores measurement data in the child units (temperature type and temperature/humidity type). There are two types of slave units: a temperature type and a temperature/humidity type, and each slave unit comes with two types of sensors (integrated and separate). Please select according to your needs. By using the analysis software that comes standard with the parent unit, you can remotely configure the child units, monitor measurement data, and collect measurement data stored in the child units. Data collected using analysis software can be subjected to various analyses depending on the purpose. *To use this product, you will need a separate child unit (wireless temperature logger child unit SK-L700R-T or wireless temperature and humidity logger child unit SK-L700R-TH) and a sensor. Display: LED Wireless standard: ARIB STD-T108 compliant 920MHz band/14 communication channels/output power approx. 20mW Communication distance: Approximately 400m (line of sight) outdoors, approximately 100m (line of sight) indoors. *Communication distance varies depending on the usage environment. We have demo units available for you to try. Communication: USB Contact capacity: Non-voltage contact, 2 contacts, maximum rating AC/DC240V 80mA *When used as a parent unit Operating environment: 0 to 50°C, 85% rh or less *No condensation Power supply: USB bus power, or two AA alkaline batteries, AC adapter (sold separately, part number: 62-6248-03 AC adapter for wireless logger) Battery life: Approximately 6 months in repeater mode *When one handset is connected to the repeater and the real-time interval is 10 minutes Size: Approx. (W) 114 x (H) 80 x (D) 35 mm *Not including antenna and protrusions Weight: Approx. 230g (including batteries) Accessories: 2 AA alkaline batteries, 1 communication cable *This device has a built-in radio that has been certified as complying with technical standards (construction design certification) under the Radio Law. *Disassembling or modifying this device is prohibited by law. *This device does not comply with radio laws outside of Japan. *Please use only in Japan. (This product is designed for use only in Japan.) Code number: 8220-00 The included CD-ROM will be discontinued. Please download the analysis software from the manufacturer's website.