Energy saving tap TAP-S10N2-2 1 set

It comes with a shutter to prevent dust from entering the socket. The layout allows for easy connection of the AC adapter. (The AC adapter socket is always powered.) You can turn connected devices on and off individually (5 outlets only). The power switch with lamp prevents you from forgetting to turn it off. It comes with a centralized switch that allows you to turn all 6 outlets on and off at the same time. A built-in breaker (overcurrent protection circuit) is activated if the capacity is exceeded, preventing fires. The plug has an insulating cap at the base of the plug blade, which is effective in preventing tracking fires. <Built-in breaker (overcurrent protection)> If the total power consumption of the connected devices exceeds 1500W, the breaker will trip and the power will be cut off. *If the circuit breaker is activated, remove any connected devices from the tap, remove them so that the current is less than 1500W, and press the reset button. <Individual switch (with lamp)> The independent lamp switch allows you to turn the current of unused devices on and off to save energy. The lamp lights up to check whether the power is on. <Double-insulated cord> The double-insulated cord is stronger and safer. <With tracking fire prevention insulating cap> The swing plug is equipped with an insulating cap that is extremely effective in preventing tracking. * Tracking If the plug is not inserted or removed for a long period of time, dust and other particles can accumulate in the gap between the outlet and the plug, causing it to become damp. If voltage is applied in this state, leakage current can flow along the surface of the outlet and between the plug blades, causing a tiny spark discharge. This causes the surface to deteriorate, forming a carbonized conductive path (track) and causing insulation breakdown. This phenomenon is called tracking. As a result, a flame can suddenly break out between the plug and the outlet, which can cause a fire. Rated capacity: 15A, 125V (up to 1500W total) Insertion port shape: 3P Plug type: 2P (with insulating cap and earth wire) Plug type: Parallel type Insulation cap: Yes Plug type: Normal type Insertion port spacing: 39mm Number of sockets: 6 Shutter: Yes Earth cord length: 10cm Power cord length: 2m Breaker: Centralized switch type Switch: Centralized switch, individual switch Cord: HVCTF2.0 SQ x 3 cores, 0.75 SQ x 1 core (earth wire) Finished dimensions: Approx. diameter 8.5mm Size: W308×D64×H25mm Weight: 598g Area of ​​use: Japan only. Cannot be used outside of Japan. Certification: Compliant with the technical standards of the Electrical Appliance and Material Safety Act (PSE)