Earthquake-resistant stopper long 4 pieces QL-60N 1 set

Prevents office equipment from falling over or dropping! Easy to attach and remove with just one coin. To prevent accidents involving computers, displays, precision instruments, medical equipment, etc. from falling over, the equipment surface is securely fastened to the installation surface with a belt. You can also use flat head screws instead of the strong adhesive pads provided, allowing you to attach it to any surface. The locking top can be easily attached and detached with a coin screw, so you can rest assured when performing maintenance on your equipment. Earthquake resistance level 7 (JIS C 0040, 0041) Object Weight: 56kg or less (4 units) Flame retardant (UL94-V0) certified product Quantity: 4 Set contents Fixed base x 8 (W38 x D9.6 x H36mm) 8 x adhesive pads Lock top x 8 Belt x 4 (W208 x D2 x H16mm) 2 alcohol pads Installation method 1. Determine the fixing position so that the bolt will not loosen. 2. Adjust the length of the belt. To move the fixing base on the belt, turn the lock top 90 degrees with a coin to switch between lock and unlock. 3. After removing dust from the mounting area, wipe with the included alcohol pad to remove moisture and oil. 4. Peel off the adhesive pad protective sheet and lightly press it against the fixing base to attach it. 5. Peel off the other protective sheet and attach it to the fixed position. 6. Leave it for 72 hours after fixing, without pulling it. 7. It can also be fixed with a countersunk screw at 15 to 20 mm without using an adhesive pad. Note Not suitable for uneven surfaces, release materials, Teflon, nylon, polyethylene, rubber, polypropylene, etc. Do not use both the adhesive pad and the screws to secure the base. Keep out of reach of infants and children. This product is not edible. When storing, keep in a cool, dark place away from direct sunlight.