Memory meter (R) temperature separation type SK-L751 1 piece

This is a "temperature" data logger that can store up to 16,000 measurement data points. With a storage interval of 1 second, data can be stored for approximately 4 hours, and with a storage interval of 90 minutes, data can be stored for approximately 2 years and 9 months. *How to calculate the total memory time from the memory interval and memory capacity: Memory capacity x memory interval = total memory time Example: 16000 x 5 seconds = 22.2 hours You can choose from 14 different memory intervals. *Data storage intervals can be set to a variety of intervals, including 1 second, 2 seconds, 5 seconds, 10 seconds, 15 seconds, 30 seconds, 1 minute, 2 minutes, 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes, and 90 minutes. You can reserve memories. *When you reserve (set) the date and time to start recording, recording will start automatically at the reserved date and time. The separate sensor SK-L751-2 is included, allowing measurements to be taken at locations away from the main unit. (Waterproof and dustproof, IP65 compliant (when connected to indicator), 1.6m cord) Up to two temperature sensors can be connected (one is included). You can choose from the following four storage methods depending on your purpose. 1. One-time method This method continues storing data until the memory is full. When the number of stored data reaches 16,000, the storage stops automatically. 2. Endless method (overwrite mode) When the memory is full, the data is overwritten from the beginning. This is the best method for collecting data from the previous fixed period. 3. Data quantity specification method You can specify the number of pieces of data to be stored in advance between 1 and 16000. This is the best method when you do not want to collect unnecessary data. 4. Page method (memory division mode) The memory can be divided into four (4 pages). Each page can store data for different locations or times in sequence, allowing one unit to function as multiple units. Each page can store 4,000 data items. Analysis software included as standard *You can make full use of the stored data, including standard graph processing and real-time monitoring. It is also possible to save in CSV format, so you can use commercially available spreadsheet software. The key lock function prevents accidental operation while storing data. Upper and lower alarm limits can be set (when the alarm is activated, the LED lights up and the "Hi/Lo" mark on the LCD flashes.) It can be used with either batteries or an AC adapter (sold separately). *When using both, the AC adapter takes priority. If the power supply from the AC adapter stops due to a power outage, the device will automatically switch to the battery. Even if the power is turned off, the measured data will be stored in the internal memory. In addition to downloading the stored measurement data to a computer, it can also be copied to a microSD memory card (sold separately). (Data can also be copied while it is being stored.) You can set a 6-digit ID number for each device. When using multiple devices, it is easy to identify each device. Analysis software features ★Up to 10 indicators can be connected simultaneously using a USB hub. *Graph display, saving, printing and analysis according to purpose (zooming in, reducing, period selection, accumulated temperature analysis function, etc.) are possible. *If the data is saved in CSV format, it can be analyzed using commercially available spreadsheet software. ★Real-time monitoring is possible. During real-time monitoring, alarm settings are possible and alarm emails can be sent to pre-registered email addresses. Supported OS: Windows 10/8.1/8 (all 64-bit/32-bit Japanese versions) *The latest service pack must be installed. Memory: 4GB or more (32bit) 8GB or more (64bit) Hard disk: 4GB or more of free space required Other: USB port To use the email alert function, an internet connection and email address are required. Measurement range: -40.0 to 80.0°C Resolution: 0.1°C Measurement accuracy: ±0.7℃ (0 to 40℃), ±0.8℃ (others) Display features: Temperature alarm (ALM) Storage method Status display (REC/RES) Memory (bar) SD Memory Low battery mark Key lock mark Each error message Display of setting value at each setting Number of measurement channels: 2 temperature channels (includes 1 waterproof and dustproof sensor SL-L751-2) Memory capacity: 16,000 data for each channel Memory interval: 1 second, 2 seconds, 5 seconds, 10 seconds, 15 seconds, 30 seconds, 1 minute, 2 minutes, 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes, 90 minutes (14 options) Dust and water resistant: IP65 compliant External memory: microSD/SDHC (up to 32GB, sold separately) *Please use commercially available memory that has already been formatted. The format supported by this device is FAT32. NTFS format cannot be used. Supported OS: Windows® 8/8.1/10 (64/32bit) Dust and water resistance: JISC0920IP65 compliant *However, when the SK-L751-2 sensor is connected or when using batteries (not waterproof when using an AC adapter) Operating environment conditions: -10 to 60°C, 85% rh or less (no condensation) Power supply: 2 AA alkaline batteries or dedicated AC adapter (optional) Battery life: Measurement mode: Approx. 500 hours, Memory mode: Can store 16,000 data items at each interval (LCD off) We recommend using an AC adapter when using the constant LCD display or measurement mode. size: Main unit: (W) 114 x (H) 80 x (D) 35 mm (excluding protrusions) Sensor part: φ3.3×L13mm Connector part: φ12×L40mm Cord: Approx. 1.6m *The sensor cord can be extended up to 10m (made to order, additional cost) Material: Sensor: SUS304, Connector: PVC resin, Cord: PVC resin Weight: Main unit: approx. 232g, Sensor: approx. 23g accessories: Separate sensor SK-L751-2 (waterproof and dustproof, IP65 compliant) Two AA alkaline batteries Communication cable (1.5m) x 1 1 instruction manual Quick Manual 1 copy Optional item: No.8229-50 dedicated AC adapter (1.5m cable) The included CD-ROM will be discontinued. Please download the analysis software from the manufacturer's website.