Induction coil ISC-60 134-170 1 unit

A non-contact control circuit is used to obtain a stable high voltage. Insulation measures have also been strengthened for safe use. It is used as a power source for spectral tubes and for high-voltage discharge experiments such as ozone generation experiments. Since it uses an AC100V power outlet, no separate power supply is required. A safe insulated type is used for the high voltage generating transformer. The generated high voltage can be adjusted using the knob. The discharge polarity can be changed by a switch. To ensure safe experiments, please carefully read the warnings and precautions in the instruction manual before use. ① Do not get wet. Doing so may result in electric shock or breakdown. ② Do not bundle the power cord of the induction coil. Doing so may result in fire or breakdown. ③ Limit discharge to 10 seconds or less per time. For long-term experiments, discharge intermittently. ④ If the distance between the electrodes is increased and a spark discharge occurs, high voltage will be applied. Never place your hands near the electrodes while electricity is flowing. ⑤ When using a Crookes tube for experiments, keep the distance between the electrodes at 1 cm or less to prevent the generated voltage from becoming too high. ⑥ Do not place unnecessary lead wires or exposed metal parts around the device. This may cause current leakage and is dangerous. Experimental items: 1. Spark discharge 2. Gas emission spectrum 3. Electrons and electron beam spark length: equivalent to 60 mm Power supply: AC100V approx. 50VA Accessories: Discharge electrode (needle and plate electrodes, 1 each) Size: W310×D260×H110mm Weight: Approx. 6.5kg Product code: 134-170