Ultrasonic sprayer SX-100S for 4L (sprayer for hypochlorous acid water Morris) 1 piece

Although it is compact, it can spray thoroughly all day with just one water supply. This is a hypochlorous acid water sprayer for Morris. It has a larger capacity than it looks! It holds a generous 4L of liquid! The volume that adjusts the amount of mist generated is stepless, so you can fine-tune it to suit your needs. - Using the power of ultrasound, hypochlorous acid water is broken down into ultra-fine particles of about 4 to 5 microns, which can then be sprayed gently and efficiently indoors. - The sprayed mist disappears immediately, but the ingredients do not fall but are carried by the wind to every corner of the room, sterilizing the air. ・It will not wet the floor. (It is also called dry fog, and it is a fog that does not get wet even if you touch it.) -Because it is an ultrasonic type, the mist that is sprayed is not hot, so there is no need to worry about getting burned. -You can use it safely indoors even when there are elderly people, children, or pets present. - Suitable for an area of ​​approximately 14 tatami mats. Can be used in homes, small shops and offices. - Stepless adjustment function for atomization amount. - Comes with a function to prevent empty cooking. *Please cooperate! This product has a recommended price. Please confirm the price. We appreciate your cooperation in selling at the recommended price. Recommended price: 19,400 yen (excluding tax) [Specifications] Equipment name: Ultrasonic atomizer Number of atomizing units: 1 Transducer drive frequency: 1.6MHz ±50KHz Transducer chemical resistance treatment...glass material Atomization amount...300cc/h or more (at water temperature/ambient temperature of 25 degrees) Applicable floor area*: Approximately 14 tatami mats (may vary depending on conditions) Operation noise: 40dB or less Installation method: Stationary type Outlet (mist outlet): 360 degree horizontally adjustable (detachable) Water supply method: Tank type Capacity: 4.0L (Prevents operation when tank is not installed) Liquid used: Subzinc acid purified water (HOCL diluted product 80ppm or less) *Only Seiko Giken designated products can be used. Water supply temperature...5 to 40 degrees Permitted ambient temperature: 5 to 37 degrees (but no freezing or fog) Permitted ambient humidity: 80% RH or less (but no mist) Rated voltage: AC 100V (50/60Hz) Allowable voltage range: 90 to 110% of the rated voltage Power consumption: 25W Weight: Approx. 2kg when dry / Approx. 6kg when full External dimensions: 215 (W) x 320 [358] (H) x 175 (D) * [ ] indicates when nozzle is installed Power cord: 1.9m with 2P plug Other features: Liquid shortage prevention function / LED indicator (blue) [How to use] Uses Maurice fluid!! ★Normally diluted 10 times (Example) 1 part Morris solution: 9 parts tap water, 2.5 times the maximum concentration (80 ppm) *Do not use tap water alone. If bacteria were to multiply, they could be spread into the air, leading to a serious accident. ★Please clean the machine tray regularly. (Example) Wipe with a soft sponge. Do not scratch with sharp objects. <Driving> (1) Start driving. (2) Adjust the amount of atomization. <Put liquid into the tank> (1) Remove the liquid tank from the main unit. (2) Remove the nozzle from the liquid tank. (3) Remove the tank cap and pour liquid into the tank. (4) Tighten the tank cap securely. (5) Place the liquid tank into the main body and attach the outlet. [Caution] *Please be sure to use Maurice fluid. *If you use liquids that should not be used, such as hypochlorite from a brand other than Maurice liquid, or sodium hypochlorite, and the product breaks down, the product warranty may not be accepted. * Transducer parts are consumables. (Replacement interval: approximately 5000 hours) There is a fee for replacing the transducer. - Please read the instruction manual carefully and use the product safely. ・Observe safety precautions. ・Do not use if broken. ・Check regularly.