1
/
of
6
サンワサプライ
Lightning guard tap 3P, 6 outlets (anti-pullout type) 3m TAP-SP36MG-3 1 set
Lightning guard tap 3P, 6 outlets (anti-pullout type) 3m TAP-SP36MG-3 1 set
Regular price
¥4,730
Regular price
Sale price
¥4,730
Unit price
/
per
Shipping calculated at checkout.
Couldn't load pickup availability
The built-in lightning guard protects your equipment from dreaded lightning. It also comes with a lightning guard operation confirmation lamp.
*When the lamp is off, it is no longer effective, so please replace it with a new one.
The built-in breaker prevents overheating and fires caused by overpowering. If the total power consumption of all connected devices exceeds 1500W, the breaker will trip and cut off the power.
<Caution>
*Even if the power consumption exceeds 1500W, the power will not be turned off immediately. The time until the breaker operates varies depending on the percentage of power consumption exceeded. ・When the power consumption exceeds 135% (2025W) / About 1 hour ・When the power consumption exceeds 200% (3000W) / About 4 to 50 seconds ・When the power consumption exceeds 300% (4500W) / About 0.8 to 12 seconds ・When the power consumption exceeds 500% (7500W) / About 0.3 to 4 seconds
*At room temperature of 25°C.
<If the breaker is activated>
*Disconnect any connected devices from the tap, remove the devices so that the power output is 1500W or less, then flip the button to the reset side and turn it ON again.
It is equipped with a centralized switch with a power indicator lamp, so you can see the power status at a glance and prevent forgetting to turn it off.
We use plugs with insulating caps that are effective in preventing tracking fires.
Comes with a 3P-2P conversion adapter.
Comes with an earth terminal.
It comes with a magnet so it can be attached to steel cabinets and desks. Color: White
Rated capacity: 15A, 125V (up to 1500W)
Plug: 3P (3P to 2P conversion adapter included)
Insertion port: 3P, 6 outlets (non-slip type)
Insertion port spacing: 35mm
Earth cord length: 150mm
Cord: HVCTF 1.5 sq. (SQ) x 2 cores, 0.75 sq. (SQ) x 1 core (earth)
Finished cord dimensions: 8.5mm
Cord length: 3m
Varistor voltage: 470V
Clamping voltage: 775V
Surge resistance: 2500A (2 times)
Size: W305×D45×H26mm
Area of use: Japan only. *Cannot be used outside of Japan.
Certification: Compliant with the technical standards of the Electrical Appliance and Material Safety Act (PSE)
View full details
