Non-contact thermometer Famidoc Plus FDIR-V22 1 unit

Measure your forehead in about 1 second without touching your body! You can measure without touching your skin. It is a hygienic non-contact measurement. ●Measures body temperature in 1 second by measuring the amount of infrared radiation from the skin on the forehead, etc. ●In addition to measuring body temperature, there is also a surface temperature measurement mode. ●Comes with soundproofing function. ●The LCD has a backlight function. ●The last 32 measurement results are stored. ●It is a power-saving type that automatically turns off the power in about 30 seconds when not in use. This product is a "controlled medical device". In order to sell it, you must submit a medical device notification. [Controlled medical device (Class 2)] Infrared Skin Thermometer Certification number: 302AIBZX00029000 (Retailers who have not filed a sales license for medical devices cannot sell this product.) [Set contents] 1 unit (Accessories: 2 AAA batteries for starter), instruction manual (with warranty), attached documents 【specification】 Measurement area: Forehead Body temperature display range: 32.0 to 42.9 degrees *If it is lower than 32 degrees, it will display "Lo" / if it is higher than 42.9 degrees, it will display "Hi" Minimum display unit: 0.1 degree Body temperature measurement accuracy: 35.0 to 42.0 degrees: ±0.2 degrees Other than the above: ±0.3 degrees Usage conditions: Temperature: 10.0 to 40.0 degrees / Relative humidity: less than 95% Storage conditions: Temperature: -25 to 55 degrees / Relative humidity: less than 95% Low voltage fluctuation: The device will function even at 2.6±0.1V, and a low voltage warning will be displayed on the screen. Batteries used: 2 commercially available AAA batteries Material: ABS resin Body size: Approx. 14.5 (length) x 4.4 (width) x 8.5 (depth) cm Weight: Approx. 100g [How to use] (1) Press the power/measurement switch and make sure that the face mark and degree mark appear on the display. (2) Hold the device 1 to 6 cm away from your forehead, press the power/measurement switch and then quickly release it. (3) Keep the device close to your forehead until you hear a beep about one second later. (Measurement complete) (4) Check the body temperature displayed on the screen. [Caution] ★ Taboos and Prohibitions ・Do not allow children to use the device alone. Do not use in flammable environments. ・Do not use near devices that emit strong electromagnetic waves. ★Important basic precautions ・Please refer to the instruction manual before use. ・Do not use batteries other than those specified. Do not disassemble or modify the product. ★Precautions for use according to the method of use Regularly check that it is working properly. - Forehead temperature may vary depending on the location where it is measured, so always measure temperature in the same place whenever possible (this also applies when measuring multiple times). ・Body temperature is constantly changing depending on conditions and states such as time of day, temperature (room temperature), and when you are sleeping. It also differs depending on individual differences, gender, and age. It is important to measure your body temperature daily and know your normal temperature value. - When measuring someone who has just returned from outdoors, when moving the product to an environment with a different temperature, or after measuring an object with a high temperature, wait at least 30 minutes before measuring the temperature. - Avoid measuring immediately after exercise or bathing. - Avoid measuring near air conditioners or heaters. ・If "Err" appears on the display, measure again. - Make sure there are no hairs or other foreign objects between the thermometer and the measurement site (skin (forehead, etc.)). - Always keep the sensor clean. - If the subject moves during measurement, the measurement may not be accurate (take particular care when measuring young children, etc.). ・Do not operate this product with wet hands. ・Remove the batteries from this product when not using it for a long period of time. When replacing the batteries, be sure to match the + and - terminals. - Handle batteries with care (do not throw into fire).