Bath Digital Thermometer B Bear 1 piece

Perfect for bathing your baby! With a warning display that notifies you of high and low temperatures, it's perfect for managing the temperature of your baby's bath. ●The power will turn on when you lightly knock the unit with the palm of your hand, and will automatically turn off after one hour. ●Measures temperature in about 5 seconds after floating in the bath. [Specifications] Material: Body: PVC, ABS resin / Temperature sensor: Stainless steel Accuracy: ±1 degree from 25 to 45 degrees, ±2 degrees elsewhere Measurement range: 0 to 50 degrees Minimum display: 1 degree Power supply: 1 x CR2032 Auto power off: Approximately 1 hour after power is turned on Measurement range: 5 seconds Body size: 95 x 75 x 30 mm Product weight...55g (including battery) [How to use] Please remove the LCD protective sticker before use. (1) Hold the unit firmly and knock lightly with the palm of your hand to turn it on. (2) Float it in the bathtub to measure the humidity. *The power will automatically turn off about 1 hour after it is turned on. Also, if you perform (1) while the power is on, it will be reset and the power will automatically turn off about 1 hour from that point. [High temperature/low temperature warning display] If the water temperature falls outside the optimum range for bathing your baby (33-38°C), you will be notified in the following ways: - High temperature warning lamp: If the water temperature reaches 39 degrees or above, the high temperature warning lamp will flash and the LCD display will alternate between showing the temperature and HOT. ・Low temperature warning display: When the water temperature falls below 32 degrees, the low temperature warning display COLD is displayed. [Caution] - Please read the instructions for use carefully before use and use correctly.