3M Plug-in Water Leak Detector WL-AD-2002-A 1 unit

Catalog number: WL-AD-2002-A Features: ●Can be used in combination with sensors and stickers according to the application. (Leaks cannot be detected by sensors alone). ●When water gets on the installed water leakage sensor, a water leakage alarm is issued. (Guard lamp (for each line), buzzer, no-voltage contact signal output (all at once and for each line)) ●Detection sensitivity can be adjusted according to the sensor used and the liquid to be detected. ●Has a self-diagnosis function that checks for sensor breaks and detection line systems. (WRNA, WRM8, WL-AD-2002-A) ●After a water leakage alarm, the alarm state is released when the leakage is restored and the water attached to the sensor is removed. ●Compact type suitable for installation inside a collective panel. Applications: ●Places where water leakage is expected, such as in the kitchen, around air conditioners, and under pipes. (Buildings, factories, etc.) ● Compatible sockets: Omron round socket 11 pin (PF113A) ● Compact type Specifications: ● Power supply (V): AC100V or AC200V ● Number of detection points: 1 ● Operating temperature range (℃): -15 to 45 ● Power supply: AC100V or AC200V ● Power supply: AC100V or AC200V ● Width x Depth x Height: 35 x 90 x 90 mm ● Applicable sensors: B-3P, S-1F, S-1FP, PS-1R, PS-2 ● Compatible sockets: Round socket (11 pin, model number: PF113A) ● External output: Water leakage output (non-voltage c contact), sensor break output (non-voltage c contact) Material/Finish: ● ABS resin (case body) Set contents/Accessories: ● Termination kit: TR-1 (included) Note: ● There is no buzzer alarm. ●A DIN rail mounting type round socket (11 pins, model number: PF113A) is required separately.