Anker Portable Power Station 522 (PowerHouse 320Wh) A1721511 1 unit

Catalog number: A1721511 Features: ● The capacity is increased by about 30% while the size is the same as the previous model (521), and the convenience has been improved by increasing the number of USB-C ports to two. ● It can simultaneously power and charge a wide range of devices from laptops to USB home appliances. ● It uses a long-life and safe lithium iron phosphate battery. ● It adopts Anker's unique [InfiniPower design] that realizes a long life of the entire product by optimizing each element that makes up the portable power source, so you can use it with confidence for about 10 years. ● This product has optimized each element, such as suppressing heat generation of thousands of internal electronic components, a product frame with high impact resistance, and the introduction of a system to monitor and manage heat generation. ● It can be stored for a long time at 100% charge, so there is enough remaining power in case of emergency, and a large light is built in for peace of mind in the event of a power outage. Uses: ● For disaster prevention and BCP measures. ● As a generator on-site. ● As a power source for free address. Specifications: ● Rated output (W): 300 ● Width (mm): 216 ● Depth (mm): 144 ● Height (mm): 211 ● Input: DC port 11-28V...9A (maximum 100W), USB-C port 5V...3A / 9V...3A / 15V...3A / 20V...3A (maximum 60W) ● Output: AC output 100V-50Hz / 60Hz, 3A, 300W (instantaneous maximum 450W), USB-C1 output 5V...3A / 9V...3A / 15V...3A / 20V...3A (maximum 60W), USB-C2 output 5V...3A / 9V...2.25A (maximum 20W), USB-A output 5V...2.4A (maximum 12W), cigarette lighter output 12V...10A ● Battery capacity (Wh): 320 Material/Finish: Battery: Lithium iron phosphate battery Caution: Do not use or store in hot places such as inside a car, trunk, or luggage rack under the blazing sun or in direct sunlight. This may cause the product to malfunction or deteriorate, and may cause it to overheat. Do not expose the product to rain or use it in a humid environment. Do not use the product in applications where malfunctions in an emergency such as data servers or medical equipment may pose a serious risk to human life or property. If any output switch is on, the battery will be consumed by standby power consumption even when no device is connected. We recommend that you keep the battery in power saving mode except when charging low-power devices such as cameras. This product is compatible with solar chargers (12V-28V) equipped with a DC 7909 male adapter. If the power consumption required by the connected device exceeds the power supply, the output to the connected device will take priority and the product will not be charged.