CUSTOM Intelligent Water Checker IWC-6SD 1 piece

Catalog number: IWC-6SD Features: ●By simply replacing the sensor (optional), you can measure pH, ORP, conductivity, temperature, salinity, and dissolved oxygen with one unit. ●Easy data recording with a commercially available SD card (1 to 16 GB), which is useful for on-site data analysis. ●Equipped with hold function, auto power off, backlight, and MAX/MIN memory function. Applications: ●Water quality management in factories and on-site. Specifications: ● Measurement range (pH): 0 to 14.00 ● Resolution (pH): 0.01 ● Width (mm): 68 ● Depth (mm): 45 ● Height (mm): 177 ● Display range (pH): 0 to 14.00 ● Oxidation-reduction potential (mV): -1999 to 1999 ● Power supply (V): 6 alkaline AA batteries (sold separately), or AC adapter (sold separately) ● Power supply: 6 alkaline AA batteries (sold separately), or AC adapter (sold separately) ● Measurement range: 0 to 14.00 PH (PH) / 0 to 200.0 mS/cm (conductivity) / -1999 to +1999 mV (ORP) / 0 to 132000 ppm (impurity Total solubility of impurities)/0-60℃ (temperature)/0-12.00% (salt)/0-20.0mg/l (DO)/0-100% (oxygen in air) ●Resolution: 0.01PH (PH)/1mV (ORP)/0.1μS/cm (0-200.0μS/cm range, conductivity)/0.1ppm (0-132ppm range, total solubility of impurities)/0.1℃ (temperature)/0.01% (salt)/0.1mg/l (DO)/0.1% (O2) ●PH electrode: PE-03, conductivity/salt sensor: CDPB-03, temperature sensor: TP-07, dissolved oxygen/oxygen in air sensor: OXPB-11 Material/Finish: ●ABS resin Set contents/Accessories: ●Instruction manual Note: ●Optional sensors are required for measurement. ●Please purchase separately according to your needs. ●Batteries are not included as a general rule. ●If any test batteries are installed, replace them with new batteries.