HALDER Threaded lifting pin, stainless steel 22352.1012 1 piece

Catalogue number: 22352.1012 Features: ●Lifting pins (hanging devices) can be easily attached and detached by simply pressing a button. ●Quicker and easier attachment and detachment than eye bolts. ●To install, press the button and insert the threaded engaging part into the screw hole (regular thread). ●Compared to eye bolts, there is no need to screw in and remove each time. Applications: ●For tasks that require frequent attachment and detachment of eye bolts. ●For transporting and assembling products, parts, jigs, and molds. ●Can be used as a substitute for eye bolts. Specifications: ●Basic load capacity (t): 6.2 ●Bolt size: M12 ●Total length (mm): 111.5 ●Neck length (mm): 24 ●Thickness (mm): 21.5 ●Thread diameter: M12 ●Length (mm): 111.5 ●Width (mm): 49 ●Instead of an eye bolt Material/Finish: ●Pin/Shackle: Stainless steel ●Spring: Stainless steel ●Push button: Aluminum (orange oxide coating) Caution: ●Load capacity (kN) is the value in the vertical tensile direction. ●Insert the pin to the neck and screw it in all the way. ●After inserting the pin, make sure the orange button has returned to its initial position and the threaded part is completely clamped before using. ●If the threaded part is not completely clamped, the workpiece may fall. Be sure to read the instruction manual before use. ●Use only in steel screw holes.