HALDER Threaded lifting pin, heat-treated steel 22352.0016 1 piece

Catalogue number: 22352.0016 Features: ●Lifting pins can be easily attached and detached by simply pressing a button. ●Compared to eye bolts, attachment and detachment is quicker and easier. ●To install, press the button and insert the threaded part into the screw hole (regular thread). ●Compared to eye bolts, there is no need to screw in and remove each time. Applications: ●For tasks that require frequent attachment and detachment of eye bolts. ●For transporting and assembling products, parts, jigs, and molds. ●As a replacement for eye bolts. Specifications: ●Basic load capacity (t): 8.4 ●Bolt size: M16 ●Neck length (mm): 24 ●Thickness (mm): 21.5 ●Thread diameter: M16 ●Length (mm): 111.5 ●Width (mm): 49 ●Instead of eye bolts Materials/Finish: ●Pin/Shackle: Heat-treated steel ●Spring: Stainless steel ●Push button: Aluminum (orange oxide coating) Note: ●The load capacity is the allowable vertical load. ●Insert the pin all the way down to the neck and screw it in all the way before use. ●After inserting the pin, check that the orange button has returned to its original position and that the screw part is completely clamped before using. ●If the screw part is not completely clamped, the workpiece may fall. Be sure to read the instruction manual before use. ●Use only in steel screw holes.