HiKOKI Electronic Disc Sander (with rubber pad) 180mm S18V 1 unit

Catalog number: S18V Features: ● Equipped with a dial-type continuously variable speed mechanism that allows you to select the rotation speed according to the work. ● High durability is achieved by adopting a two-part motor coil shape with high heat dissipation and an iron bush in the bearing chamber of the resin housing. ● The dial-type continuously variable speed mechanism allows you to set the rotation speed suitable for the work. ● The constant speed control is adopted, so there is little drop in rotation even under load, and a stable finish is obtained. ● The spindle lock allows you to easily replace the tip tool. ● The air cover is attached, so you can change the direction of the cooling air if you are concerned about it. (Detachable) Uses: ● For polishing work with sanding paper. Specifications: ●No-load speed (min-1): 1500-4800 ●Pad dimensions (mm): 180 ●Paper dimensions (mm): 150 ●Dimensions (mm): 214 x 230H ●Power supply (V): Single phase 100V ●Power consumption (W): 1010 ●Rated current (A): 10.6 ●Sanding disc dimensions (mm): 180 ●No-load speed (min-1): 1500-4800 ●Sanding disc mounting shaft dimensions: Diameter 16mm x Length 20mm ●Double insulated structure ●Carbon brush No. 73 ●Infinitely variable speed ●Side handles can be mounted on both sides ●Air cover included Material/Finish: ●Body: Resin Set contents/Accessories: ●Sanding disc (P80) ●Rubber pad ●Washer nut ●Side handle ●Spanner Note: ●The Hitachi Koki Co., Ltd. brand was changed to "HiKOKI" in October 2018. ●Toishi cannot be used.