LOCKMAN Electromagnetic Lock VOLCALOCK LC-4500DLSS LC-4500DLSS 1 unit

Catalog number: LC-4500DLSS Features: ● A small, waterproof electromagnetic lock with an adhesive force of 200 kg. It can be installed both indoors and outdoors. ● Mounting screw holes are located on the front and side, so it can be installed on either the front or side. ● In the event of a power outage, it will be unlocked, so you can avoid being locked in. ● [What is a "magnetic lock" (electromagnetic lock)] It is an electric lock that uses the principle of electromagnetism to lock with a strong magnetic force. It has a simple mechanism that controls the locking state by turning the power on and off, so there are no moving parts and it is very durable. In the event of a power outage, it will be unlocked, so you can avoid being locked in. ● [Installation using a wide variety of mounting brackets] It can be installed on both swing doors and sliding doors. Since it can be installed on the surface, there is no need for costs such as replacing the door, and the system can be introduced at a low price. ● [Incorporating into various systems] Since the electromagnetic lock can control the locking state by turning the power on and off, there are many cases where it is used as a component part for face recognition systems, safety devices, and automatically controlled locking units. In addition, the power supply supports both DC12V and DC24V. The sensor is also equipped with a lock signal and a door-closing signal. The range of devices that can be combined is expanded. ● [Waterproof specification that can be installed anywhere] Waterproof specification that can be installed outdoors. There are various examples of outdoor installation, from sliding gates such as school gates and parking lot entrances to swing-door gates such as nursery schools and kindergartens. In addition, it can be used not only outdoors, but also in places where water is used for maintenance and cleaning, so it is also active inside industrial machinery, clean rooms, food factories, etc. Uses: ● As a locking unit for doors and gates, safety fences, industrial machinery doors, etc. ● [Factory] Install at the fence entrance around large machines as a locking unit for safety devices. Since it is equipped with a lock signal and a door-closing signal, it can be used to build a system where the machine will not operate unless a signal is obtained. ● [Factory] For interlocking the front room of the clean room. It can be combined with a mechanism that issues a signal when exposed to an air shower for a specified number of seconds, or a device that issues a signal when hand disinfection is performed, to build a system. ● [Factory] As a locking unit to be installed on cabinets used for material management. It is difficult to install electric locks such as motor locks on existing cabinets, so we selected an electromagnetic lock that can be installed on the surface. ● [Hospital] As a measure against unauthorized departure from hospital in inpatient wards. By installing it together with a keypad and card reader, you can prevent patients from leaving without permission. ● [School] For outdoor gates such as school gates. Some municipalities have selected it as a designated product. It can be used to improve convenience by replacing analog locking methods such as padlocks with electric control. ● [Public facilities] For outdoor wire mesh fence entrances to areas that require permission to use. In this case, the area is also an evacuation zone in the event of a disaster, so a mechanism was built to link with earthquake detector signals. It can be combined with various equipment to create a flexible system. Specifications: Color: Black; Case dimensions (mm) width: 168; Case dimensions (mm) depth: 32; Case dimensions (mm) height: 26; Main unit dimensions width x depth x height (mm): 164 x 26 x 32; Adsorption plate dimensions width x depth x height (mm): 145 x 8.5 x 30; Standard cable length (mm): approx. 1800; Rated voltage: DC12V, DC24V; Locking signal, door closing signal: Yes; Operating temperature range: -10 to 60°C (no condensation or freezing); Installation method: Screw fastening (2 M5 screws included); Power cord length: 1.8m; Waterproof: Yes IP66; Adsorption force (kg): 200; Note: Installation of the equipment requires electrical and wiring work. The electromagnetic lock cannot be operated alone in the cases introduced in the application. A system needs to be constructed. Please contact us if you are considering an electromagnetic lock system. For other precautions, please refer to the instruction manual included with the product.