Catalog number: ZN001 Features: ● Contains 96% zinc powder, providing excellent long-term rust prevention. ● Uses epoxy resin, so it adheres well to the substrate and can be topcoated, expanding workability. ● One-component type that does not drip when applied and dries quickly. ● Standard type with gray finish. Applications: ● Rust prevention repair of welding marks, cut surfaces, drilling, zinc drips, scratches, and non-plated areas on galvanized steel. ● Alternative to galvanizing large structures that do not fit into plating tanks and thin materials that are subject to thermal distortion. ● Repair paint to extend the life of galvanized plating on old steel towers, ships, bridges, electrical equipment, etc. that have begun to rust. ● For long-term rust prevention of steel materials. Specifications: Color: Gray Capacity (ml): 300 Operating temperature range (℃): Temperature above 5℃, humidity below 85% Heat resistance temperature (after application and drying): 180℃ Operating temperature range: Temperature above 5℃ (humidity below 85%) Zinc content in dried coating: 96% Coating area: 0.6 square meters (recommended film thickness 80μm) Drying time: Touch dry in 20 minutes (23℃) Materials/Finish: Main components: Zinc powder, epoxy resin, additives, solvents Caution: Shake the container up and down at least 20 times before use. Insufficient shaking may cause clogging. If there is any remaining product after use, turn the container upside down and spray for about 2 seconds before using again, then cap and store. For more information, please refer to the Safety Data Sheet (SDS).
