Catalog number: SP001 Features: ●Since zinc flake powder is used, it is 100% zinc and has a silver finish. The color harmonizes with the zinc plating, so the repaired area is not noticeable. ●Since epoxy resin is used, it adheres well to the base material and can be topcoated, expanding workability. ●It is a one-component type that does not drip when painting and dries quickly. Applications: ●Rust prevention repair of welding marks, cut surfaces, drilling, zinc drips, scratches, and non-plated areas of zinc-plated steel. ●Alternative to zinc plating for large structures that do not fit into plating tanks and thin materials that are subject to thermal distortion. ●Repair paint to extend the life of zinc plating that has started to rust due to old things such as steel towers, ships, bridges, and electrical equipment. ●For long-term rust prevention of steel materials. Specifications: Color: Silver Gray Capacity (ml): 420 Type: Spray Zinc content (%): 92 Operating temperature range (℃): Temperature above 5℃, humidity below 85% Container type: Aerosol can Capacity (L): 0.42 Zinc content in dried coating: 92% Drying time: Touch dry in 20 minutes (23℃) Coating area: 1.1 square meters (recommended film thickness 80μm) Heat resistance temperature (after application and drying): 180℃ Operating temperature range: Temperature above 5℃ (humidity below 85%) Material/Finish: Main components: Zinc powder (flake powder), epoxy resin, additives, solvent Caution: To prevent clogging, be sure to shake the container up and down at least 20 times before use. If there is any remaining after use, turn the container upside down and spray for about 2 seconds before using it again, then cap and store. For more information, please refer to the Safety Data Sheet (SDS).
