NIS Super Zinc 5kg SP003 1 can

Catalog number: SP003 Features: ●Since zinc flake powder is used, it is finished in silver with 100% zinc, and the color harmonizes with the zinc plating, so the repaired area is not noticeable. ●Since epoxy resin is used, it adheres well to the base material, and it can be topcoated, expanding workability. ●It is a one-liquid type that does not drip when painting and has a short drying time. ●A small amount type that is ideal for partial repairs, and comes with a convenient brush that can be used immediately on site. Uses: ●Rust prevention repair of welding marks, cut surfaces, drilling, zinc drips, scratches, and unplated areas of zinc-plated steel. ●Alternative to zinc plating for large structures that do not fit into plating tanks and thin materials that are subject to thermal distortion. ●Repair paint to extend the life of zinc plating on old steel towers, ships, bridges, electrical equipment, etc. that have started to rust. ●For long-term rust prevention of steel materials. Specifications: ●Color: Silver gray ●Type: Brush application ●Remarks: Since zinc flake powder is used, it is finished in silver with 100% zinc, and the color harmonizes with the zinc plating, so the repaired area is not noticeable. Since it uses epoxy resin, it adheres well to the substrate, can be topcoated, and expands workability. It is a one-component type that does not drip when painting and has a short drying time. ● Zinc content (%): 92 ● Operating temperature range (℃): Air temperature 5℃ or higher, humidity 85% or lower ● Container type: Paint can ● Capacity (kg): 5 ● Zinc content in dried coating film: 92% ● Drying time: Touch dry in 20 minutes (23℃) ● Coating area: 12.2 square meters (recommended film thickness 80μm) ● Heat resistance temperature (after application and drying): 180℃ ● Operating temperature range: Air temperature 5℃ or higher (humidity 85% or lower) Material / Finish: ● Main components: Zinc powder (flake powder), epoxy resin, additives, solvent Caution: ● Stir thoroughly until you can confirm that there is no sediment at the bottom of the can before using. ● Be sure to shake the container up and down at least 20 times before use. ● For more information, please refer to the Safety Data Sheet (SDS)