NIS Luster Zinc 3.5kg LU003 1 can

Catalog number: LU003 Features: ●By using zinc flake powder and lustrous aluminum powder, it is a lustrous finish that is closest to the plating color. ●Since it uses epoxy resin, it adheres well to the base material and can be overcoated, expanding workability. ●It is a one-component type that does not drip when painting and has a short drying time. Applications: ●Rust prevention repair of welding marks, cut surfaces, drilling, zinc drips, scratches, and non-plated areas of galvanized steel. ●Alternative to galvanizing for large structures that do not fit into plating tanks and thin materials that are subject to thermal distortion. ●Repair paint to extend the life of galvanized plating on old steel towers, ships, bridges, electrical equipment, etc. that have begun to rust. ●For long-term rust prevention of steel materials. Specifications: ●Color: Light silver ●Type: Brush application ●Summary: By using zinc flake powder and lustrous aluminum powder, it is a lustrous finish that is closest to the plating color. Since it uses epoxy resin, it adheres well to the base material and can be overcoated, expanding workability. This is a one-component type that does not drip when applied and dries quickly. ● Zinc content (%): 82 ● Operating temperature range (℃): Air temperature above 5℃, humidity below 85% ● Container type: Paint can ● Capacity (kg): 3.5 ● Zinc content in dried coating: 82% ● Drying time: Touch dry in 20 minutes (23℃) ● Coating area: 6.6 square meters (recommended film thickness 80μm) ● Heat resistance temperature (after application and drying): 180℃ ● Operating temperature range: Air temperature above 5℃ (humidity below 85%) Material/Finish: ● Main components: Zinc powder (flake powder), aluminum powder, epoxy resin, solvent, additives Caution: ● Stir thoroughly until no sediment is found at the bottom of the can before use. ● For more detailed information, please refer to the Safety Data Sheet (SDS).