PISCO Nylon Tube Black 4X2.5mm 20M NA0425-20-B 1 Roll

Catalog number: NA0425-20-B Features: * Excellent pressure resistance, abrasion resistance, and cold resistance. * Resistant to bending fatigue, allowing for long-term stable use. * Convenient cut marks for cutting the tube are provided at approximately 500 mm intervals. Specifications: Color: Black; Outer diameter (mm): 4; Inner diameter (mm): 2.5; Minimum bending radius (mm): 10; Total length (m): 20; Maximum operating pressure (MPa): 2.0 (20℃ 65%RH); Operating temperature range (℃): For air: -20 to 100 (no freezing); For water and heat transfer oil: -15 to 90 (no freezing); Operating fluid: Air, water (conditions apply), heat catalyst oil (conditions apply); Wall thickness (mm): 0.75; Tube outer diameter (φD) (mm): φ4; Tube inner diameter (φD) (mm): φ2.5; Minimum mounting radius (mm): 15; Operating pressure: 2.0MPa (20℃ 65%RH)● Vacuum pressure: -100kPa● Temperature range: -15 to 90°C (water, heat transfer oil, no freezing), -20 to 100°C (air, no freezing)● Made in an ISO14001 certified factory● Made in an ISO9001 certified factory Material/Finish: ● Nylon (PA12) Caution: ● Do not apply loads such as tension, twisting, or extreme bending to the tube. This may cause the tube to collapse, burst, or come off. ● Do not scratch the tube by rubbing or entangling it. This may cause the tube to burst. ● The burst pressure of the tube decreases with increasing temperature, so be sure to understand the operating pressure and ensure a sufficient safety margin. ● Use the tube at or above the minimum bending radius. ● When piping the tube, allow sufficient margin in consideration of changes in length, etc.