SANWA Gigabit Switching Hub (8 ports with magnet) LAN-GIGAP801BK 1 unit

Catalog number: LAN-GIGAP801BK Features: ●1000BASE-T compatible switching hub with magnet that can be fixed to steel desks, etc. ●8-port switching hub compatible with 1000BASE-T. ●Equipped with a strong magnet, it can be firmly fixed to steel desks, cabinets, etc. ●Compact design with plastic case, so it can be installed anywhere. ●Equipped with loop detection function to notify of loop failure. *Operation may become unstable in a mixed environment with other companies' products that have the same function. ●Fanless specification, so the operation noise is quiet. ●Equipped with AUTO-MDIX function that can be used without worrying about straight cables and cross cables. ●Equipped with AUTO-Negotiation function that can automatically switch between 10/100/1000Mbps according to the connected device. ●Equipped with power saving function that automatically detects unlinked ports and reduces power supply. Up to 82% power saving is possible when shutting down the computers of all ports. ●Power supply is AC adapter specification and tracking fire prevention cap is already attached. Specifications: Width (mm): 137.9 Depth (mm): 66 Height (mm): 25.5 Number of ports: 8 ports Standards: IEEE802.3 (10BASE-T Ethernet) IEEE802.3u (100BASE-TX Fast Ethernet) IEEE802.3ab (1000BASE-T) IEEE802.3x (Flow control for Full-Duplex) Access method: CSMA/CD Switching method: Store & Forward Transmission method: 100Mb ps/10Mbps (full duplex, half duplex), 1000Mbps (full duplex)●Port configuration: 1000BASE-T/100BASE-TX/10BASE-T (RJ-45) AUTO-MDIX x 5 ports●Buffer memory: 192Kbytes (dynamically allocated to each port)●Main unit size (mm): Approx. W137.9 x D66 x H25.5mm, wall mount hole size: Approx. W19.9 x D8 x H3.4●AC adapter cable length: Approx. 150cm (excluding connector)●Power consumption (MAX): 3.15W Note:●The amount of heat generated by this product differs when it is only powered on and when it is communicating.●The main unit may overheat, especially if a large amount of communication is performed continuously.●Continuous use in an environment with little ventilation and poor heat dissipation may cause deterioration of internal parts and shorten the product life. ●When using the product, do not place anything on top of the main unit and leave at least 10 cm of space around the ventilation holes.