SANWA Digital Multimeter True RMS compatible CD772 1 unit

Catalog number: CD772 Features: ●Supports true effective values ​​(AC only). ●Direct reading of temperatures from -20 to 300°C is possible. ●Supports large currents of 15A for both DC and AC. ●CE-standard product. ●Equipped with a 30KA high breaking capacity fuse. ●Includes a continuity check function that turns on an LED. ●Temperature can be measured using the included thermocouple sensor. ●Auto power save function that activates after about 30 minutes and can be deactivated. ●Frequency and capacitor capacity can be measured. ●The outer periphery uses impact-resistant elastomer. Applications: ●For equipment maintenance. ●For research and development. ●For electronic work. ●For checking the performance of electronic components. Specifications: ●DC voltage (V): 1000 ●AC voltage (V): 1000 ●DC current (A): 15 ●AC current (A): 15 ●Resistance (Ω): 40M ●Detection method: True RMS rectification ●Continuity check: Sounds and LED lights up at 0 to 85Ω (±45Ω) Open voltage: Approx. 0.4V●Calibration documents: Supported●Power supply (V): 2 AA batteries (R6P) (included)●Width (mm): 82●Depth (mm): 44●Height (mm): 166●Power supply: 2 AA batteries (R6P) (included)●Continuous use time (h): 150 hours●Maximum display (counts): 4000●Frequency (Hz): 100k●Temperature (℃): -20 to 300●Capacitor capacity (F): 100μ●Diode test: Open voltage 1.5V●Detection method: True RMS rectification●Maximum display: 4000 counts●Battery life: 150 hours●Width x Depth x Height: 82 x 44 x 166 mm●Power supply: 2 AA batteries (R6P) (included)●Fuse specification 1: Φ6.35 x 32mm 0.5A/1000V 30kA Ceramic tube (F1200) ● Fuse specification 2: Φ10×38mm 16A/1000V 30kA Ceramic tube (F1203) Set contents/accessories: ● Test lead (TL-25a) ● K-type thermocouple temperature sensor K-250CD ● Instruction manual Caution: ● Do not use if the main unit or test lead is damaged. ● During measurement, do not hold the test pin side of the test probe from the flange. ● Connect the ground side (black test lead) of the test lead first, then connect the live side (red test lead). When disconnecting, remove the live side first. ● During measurement, do not switch to other functions or ranges or plug the test lead plug into other measurement terminals. ● Use fuses of the specified shape and rating.